Ultra-Flex™ Hose Ends - For use with Ultra-Flex Hose
Ultra-Flex Hose ends have been developed by Earl’s to be used with our
Ultra-Flex 650™ hose. The crimp design offers our lightest alternative in
plumbing a race engine. The Mil Spec Type III hard anodizing also is
impregnated with Teflon® to significantly reduce friction of the fluids
running through the line assemblies. The advantages of the smooth bore
teflon hose no longer ends at the hose end, but continues through the
entire assembly!
All Ultra-Flex hose ends are crimped to Ultra-Flex 650™ Hose with Earl's lightweight aircraft aluminium crimp collars. These are supplied with each fitting.
Click here for Ultra-Flex Hose
| Earl's Ultra–Flex™ Crimping Machine | Ultra-Flex™ Crimp Collar |
 |
 |
Note: The part numbers listed below are for standard nut length. Short nut lengths are also available. Substitute part no. 67XXXX for 65XXXX
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||
ULTRA-FLEX™ QD HOSE ENDS
| Manufactured to be used with Earl's new Ultra-Flex 650™ hose, Earl's QD hose ends are made to reduce time, space and weight issues in certain race situations. These hose ends are threadless and the male and female designs are manufactured for smooth and effortless installations every time. They are coupled by a threadless clamshell colsure that is manufactured by the leader in the industry - Adel Wiggins. Earl's QD hose ends are plated with the same Mil-Spec III hard anodizing and our exclusive Teflon© impregnation for a great reduction in the fluid flow friction. Our male ends also come with plasma coated nitrile o-rings installed for longer life. |
 |
|
|
||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||
ULTRA-FLEX™ AN MALE HOSE ENDS
Ultra–Flex Male AN Hose ends have been developed by Earl's to be used with our Ultra–Flex 650™ hose. These hose ends eliminate the need for an Adapter so they provide a lower profile where space is limited. The male AN thread swivels for easy installation and seals on a Buna O–ring. The traditional hex sizes have also been reduced to save weight and the port side is contoured for increased flow. (Teflon® is a registered trademark of DuPont Performance Elastomers)
|
|
||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||
ULTRA-FLEX™ -12 OIL PAN BANJO
| This oil pan banjo and bolt has a very low profile to help with ground to pan height issues. It is fully adjustable and is mated to the highest flowing hose on the market today. Parts are all plated in Type III, class 1 hard anodizing for toughness and the bolt and banjo are Teflon® impregnated for increased flow. A debris screen can be added as an option for ultimate protection. Banjo, bolt and screen are sold separately. |  |
|
|
||||||||||||||||||||||||||
| |||||||||||||||||||||||||||
